Cadbike 44 project started
22 November 2008, makeover started in 2018
18 May 2018
Modified oiltank, added magneto, added Motone Belair
taillight (designed by me and available in real life
by the way) with the housing integrated into the
sissybar. Also added logo's on the tank and a
27 April 2018
Started on a makeover, begining with a modification
on the Harmon forks. I tapered in the fork legs
starting at the lower tree, I think this looks kinda cool.
Also I added a curved top motor mount and changed the
color from blue to red. More to come!
30 September 2009
Re-rendered in Hypershot
17 March 2009
Modified motormounts of frame,
added footpedals, added rear brakerod
3 February 2009
Modified the centers of both wheels,
rear wheel was modified to accept a K-tech
drumbrake. Added rear chain and changed
colourscheme to silver & blue.
27 January 2009
Changed rear fender, oiltank , pipes and sissybar.
Added kickstarter and seat.
20 January 2009
I did not like the look of this project very much so I
made some changes: Replaced Twincam motor with
knucklehead. Tin primary replaces open belt, forks
have been narrowed, front brakes removed, frame
has been lowered and shortened, and the paint changed!
23 December 2008
Added pipes, changed rear frame to
match angle of forks and pipes, added
oiltank and narrow primary belt .
16 December 2008
Added rear fender, sissybar & gearbox
lowered headlight and made it a bit bigger.
Added chain tensioners, changed brakediscs
2 December 2008
I decided to try this bike with a Twincam A,
just for fun. I had to narrow the hub of the
front wheel to make room for the brakediscs.
Also added a tiny headlight molded into the top tree.
Both trees are not stock Harman by the way,
but a more rounded version I designed.
25 November 2008
Another project using some of the parts I have collected,
who knows, maybe we'll build it for real? Forks are Harman,
wheels stock HD, tires Firestone. Frame is nice and narrow
with molded in tank.