Copyright WWW.DBBP.COM | updated 27 November-2007

My BMW Bobber, part 66
CAD version here


 
 
 

We did not really trust the front part of the tank, as we had noticed when replacing the tunnel that the metal at the front was very thin. Using the tape template method we learned from Ben and Emile the Metalshapers, I made the tape template and Aad used that to create a replacement panel. Ben did the other side live at the bike show a few weeks back. When all is back together we will have replaced about 60% of the metal on the tank.....


 
 

Previous