(Cadbike 38 project started January 2007,
my first Cadbike using a Twincam B powertrain)

1 January 2008 Inspired by Cole Foster's Moonrocket I decided to try a full fairing on this bike. 10 July 2007 Changed size and colour of the Nitrous bottle, added brake pedal and shifter pedal, added rear brake calipers 3 July 2007 Added more detail to primary cover, added clutch line and added a bottle of Nitrous Oxide 26 June 2007 Replaced rear drumbrake with a perimeter disc and a deep dished sprocket, added a different rearend and changed the colour. 19 June 2007 Added oillines and oil filler cap 22 May 2007 Moved the rear shock to a position under the seat and started on oiltank. 8 May 2007 Added front perimeter brake and rear fender. Added a wider red trimline to the wheels. Changed the front shock mount and started changing rear suspension to match the style of the front suspension. 1 May 2007 Lowered the whole bike by 1.5 inches and changed the design of the wheels 17 April 2007 Added seat springs and changed the colour, also much less chrome this time. 10 April 2007 Completed the pipes with some "Thunderbirds style" mufflers, added headlight, completed RSD gearbox. 3 April 2007 Added carb and started on pipes 20 March 2007 Just playing around a bit with this one, it is a bit weird but I like it... Added gascaps + handlebars and started work on the seat. 13 March 2007 I added a set of fueltanks that follow the angle of the ribs on the front cylinder, and leave the front suspension fully exposed. 6 March 2007 I added a smooth rear drumbrake and the rear chain, modified the front suspension too. 27 February 2007 I made a removable frame section, neccessary to mount or remove the engine. The front forks have been restyled to match the rear swingarm. 20 February 2007 I worked on the lower frame, swingarm and forks 13 February 2007 I added something I have been wanting to do for ages; a front suspension with the shock mounted on the frame instead of on the forks. This way the front end can be ultralight! I added a modified version of the swingarm that we built for Aad's bike (Cadbike 31), it will be shortened a bit more next week. 6 February 2007 I designed some cast 10 spoke wheels, kind of a mix of some classic styles I like. Also I added the steering neck, fixed the trail at 4 inches and the neck angle at 35 degrees. 30 January 2007 I started this project because I wanted to do a model of the Twincam 88B and I had a crazy idea for a frame that I want to try