Cadbike 45 project started 21 February 2008
1 September 2009 Added front and rear brakelines, braklepedal and shiftpedal, modified top motormounts 18 August 2009 Added transparent red flexible segments to the oillines, and added fifth transmission mount on frame. 4 August 2009 New grips, footrests and oillines 23 June 2009 Completed rear brake, changed primary cover, started on Midcontrols added centerstand and played with the colours a bit 9 June 2009 Changed angle of forks, added rear brake caliper, coil and plugwires 26 May 2009 Added fuelcaps, oilcap, seatsprings, more Torx bolts, CSC kicker-pedal & front brake caliper brackets 19 May 2009 Added smaller discs, Tokiko brake calipers, cleaned up tops of fork legs, added details to headlight, added exhaust mounting brackets, started replacing all allen bolts with torx bolts. 12 May 2009 Replaced the perimeter brakediscs with conventional discs, looks like these also hide the front wheel too much. Next week I will try smaller discs. Added seat upholstery and a headlight inspired by something I saw on a small Peugeot scooter. Also I slightly flattened the bottoms of the tires for more realism, new background and a block of wood under the frame to keep the bike from falling over;-) 21 April 2009 Different handlebars, perimeter brakediscs on the front wheel, top motormounts, seat frame... 14 April 2009 Added a weird exhaust system, 2 into 4 into 2 pipes... Also added a racy little seat, chain and sprockets. 6 April 2009 Added clipon handlebars, primary cover and clutch. Also removed electric starter and added kickstarter.... 24 March 2009 Added 9-spoke wheels and gastanks, added rear motormount and transmission plate on the frame. 10 March 2009 Added a hardtail frame that I designed especially for the new X-Wedge engine 3 March 2009 Added narrow 11mm belt and 6-speed gearbox, USD forks and Avon MK II's 24 February 2009 Started with an S&S X-wedge engine added my own design intake manifolds to mount 2 Weber IDF carburators!