Project started September 2025,
22 December 2025: I added the fueltanks, brake and clutch levers with switch housings and the headlight glass 8 December 2025: I added headlight housing, tires, wheelcovers, hubcover, aircleaner cover, dash baseplate, throttle and grips 24 November 2025: From front to back, I added the 16" spokewheels with separate hub, rim, spokes and spokenipples. I also added the cowbells under the lower tree, the handlebars and riser clamp, the inner aircleaner and the "moon" pointcover. I changed some of the engine hardware to match that of the real bike. On the transmission I added the kicker arm and kickstart pedal. 3 November 2025: This time I have added the batterybox assembly, lowered forklegs and shorter rear shocks, exactly like on my real bike 20 October 2025: I completed the CAD model of the swingarm frame; CAD files are now for sale in my webshop dbbpshop.com Next I have borrowed, scanned and modeled both fork trees and the oiltank. Thanks to Flakekings for letting me borrow the parts. The S&S E carb I already had in my CAD library, same goes for the swingarm and Brembo rear brake. At the moment I am scanning the Battery Box which I temporarily took off my bike. 29 September 2025: A new project, but different from the previous ones. This time the plan is to make a CAD model of a bike that I already built, my ex-police Barnfind Shovelhead. I started by scanning the rear part of the frame, using the piece I cut off when hardtailing Cadbike 56. There are a lot of parts that I already had in my CAD library, but also a lot that are missing, let's go!